The
56F802 is supported by the CodeWarrior v5.0. This version of CodeWarrior
probably does not have the 802 stationary or the flash config files, but the 801
ones can be used or the better choice would be to use the SDK stationary.
|
The
56F802 is supported by the CodeWarrior v5.0. This version of CodeWarrior
probably does not have the 802 stationary or the flash config files, but the 801
ones can be used or the better choice would be to use the SDK stationary.
|
Pete, The version of the tools that supports the 802 is CodeWarrior for DSP v5.1. If you going to the following link: http://www.metrowerks.com/MW/Develop/Embedded/DSP56800/Default.htm this will give you information about CW for DSP 5.1. If you look inside of the datasheet it will tell you which processors are supported. Supported Processors/EVMs 56F801 56F807 56F802 56F826 56F803 56F827 56F805 Regards, Irene --- In , "Pete Gray" <teknologikah@y...> wrote: > About the 802 - does CW v5.0 support it? I went to Metrowerk's site, > and looked under the newer v5.1 "Detailed Features" for CW/DSP56800. > All the other chips (801/3/5/7 etc) are listed under Supported > Processors, but not the 802. > > Anybody know? > > TIA, > -Pete. |