"Sam \(r�p. sans -no-sp-am\)" <totalsam-no-sp-am@hotmail.com> wrote in
news:3fe0c61b$0$773$5402220f@news.sunrise.ch:
> Ok, and is there a freely available bootloader for Blackfin ?
I don't know, but the best place to ask would probably be the uClinux
mailing list. I believe there are a couple of embedded boot loaders
available but I don't know how much has been done to port one to the
Blackfin.
--
Kenneth Porter
http://www.sewingwitch.com/ken/
Reply by ●December 17, 20032003-12-17
> If you have JTAG-programmable Flash (like an ezkit), you can use its
> utility to Flash either the whole shebang or a boot loader into place.
Ok, and is there a freely available bootloader for Blackfin ?
Reply by Kenneth Porter●December 17, 20032003-12-17
"Sam \(r�p. sans -no-sp-am\)" <totalsam-no-sp-am@hotmail.com> wrote in
news:3fe09623$0$779$5402220f@news.sunrise.ch:
> I would like to know if there's another way to download a software to
> an ADSP board than VisualDSP++, especially a solution for Linux. I
> would like to develop an application for a blackfin.
If you have JTAG-programmable Flash (like an ezkit), you can use its
utility to Flash either the whole shebang or a boot loader into place.
--
Kenneth Porter
http://www.sewingwitch.com/ken/
Reply by ●December 17, 20032003-12-17
Hello !
Thanks for reading !
I would like to know if there's another way to download a software to an
ADSP board than VisualDSP++, especially a solution for Linux. I would like
to develop an application for a blackfin.
Thanks in advance !
Sam