Actually, I think that all Metrowerks offers is a $3,000 third-party
software "driver" that implements "virtual pipes" over
CANbus, but does not
give you control over message IDs on the fly.
I think the order number for the doc describing this marvel is
"ENGRCHGCAN".
It took me weeks to get just the doc from Moto. If you try to go that route
and can not get the doc from your salespeople, let me know and I can
probably dig out a copy. This is not a recommendation!
Art Johnson gave me a hand - he had some extra writes that I never found in
the manual. If the Moto manual had been my only source of information, I
would still be poking registers and cursing the docs. I sure hope Freescale
updated their manual chapter for this peripheral!
Rick Corey
-----Original Message-----
From: Gary Olmstead [mailto:]
Sent: Tuesday, February 22, 2005 11:09 AM
To:
Subject: Re: [motoroladsp] Digest Number 739
At 10:26 PM 2/21/05, you wrote:
>Subject: RE: 56800 SDK CAN driver
>Hello,
>I'm a new member of this group and I am also looking out for the MSCAN
>drivers for the DSP56F805 boards.
>I got the free CD from freescale but the driver files do not install with
>the license they provide.
>So what should I do? Please help.
I've lost my CD-ROM, so I have to guess that the code comes from
Metrowerks. Go to their web site and contact them. They are very helpful.
Gary Olmstead
Toucan Technology
Ventura CA
Reply by ●February 21, 20052005-02-21
Hello,
I'm a new member of this group and I am also looking out for the MSCAN
drivers for the DSP56F805 boards.
I got the free CD from freescale but the driver files do not install with the
license they provide.
So what should I do? Please help.
Thanks
vivek
UIC
> Hi schwca (?)
>
>RE: documentation for the "premium" MSCAN12 driver (which I would
call a
>mini-application).
>
>you said:
><< "Digital DNA" help emails me back a
>response to contact one of the distributors for price information>>
>
>I browbeat salesmen and reps for weeks before getting this doc. I thought
>their concept of "virtual pipes" was bizarre and inappropriate to
>microcontroller, let alone DSP applications. Whatever. It also did not
>support changing message IDs 'on the fly'.
>
>I hear there is an NRE cost of $3000 USD, with no royalties. Ordering number
>is alleged to be: ENGRCHGCAN. Good luck! (I hope this doesn't count as
a
>"commercial" post!)
>
>If anyone wants this doc, and it is not attached to the Email you receive
>from the mail list, please Email me privately and I will forward it.
>
>I heard that some third party developed it for them, and this is why it is
>expensive. They gave us royal Heck when we asked to evaluate it, accusing
>us of wanting to copy the code and not pay for it - when we were just asking
>for minimal examples of how to configure the control registers.
>
>The Email I got from Daniel Malik (who found the doc and forwarded it to me)
>stated that one can evaluate it by just signing an NDA. So far, *every*
>useful answer I have gotten from D-DNA came from Daniel Malik.
>
>I would love to know your thoughts about this doc and driver (if you try
>it). Would you like my sample code for configuring the peripheral?
>
>Rick Corey
>
>
>-----Original Message-----
>From: schwca [mailto:]
>Sent: Tuesday, August 26, 2003 3:01 PM
>To:
>Subject: [motoroladsp] 56800 SDK CAN driver
>Motorola does not place the SDK MSCAN drivers on the 2.5 or 3.0 CDs.
>SDK and Motorola website says that they are "priced separately"
but
>that's all it says about it. "Digital DNA" help emails me
back a
>response to contact one of the distributors for price information. As
>I expected, none of the distributors know anything about how to
>acquire these files.
>
>Do any of you know how to acquire the "priced separately" drivers?
At
>this point I'm thinking of figuring out how to make the minimal
>functions of the CAN that I need without getting the SDK.
>
>Is CANOpen protocol available for DSP8600s?
>
>Thanks
>
>_____________________________________
>Note: If you do a simple "reply" with your email client, only the
author of
>this message will receive your answer. You need to do a "reply
all" if you
>want your answer to be distributed to the entire group.
>
>_____________________________________
>About this discussion group:
>
>To Join:
>
>To Post:
>
>To Leave:
>
>Archives: http://www.yahoogroups.com/group/motoroladsp
>
>More Groups: http://www.dsprelated.com/groups.php3
>">http://docs.yahoo.com/info/terms/
> Attachment (not stored)
>
> mscan_man MOTO MSCAN12 driver manual.pdf
> Type: application/octet-stream
Reply by Hutchings William-p23437●August 28, 20032003-08-28
The
documentation for the premium components are included in the standard SDK so
that if you are interested in the components and want to find out about them
they are on the HTML help and on the SDK CD in pdf form. PDF documentation on
all the premium and non premium components can also be found on the Motorola SPS
website on the SDK product page below.
An evaluation license is available for all
the premium components so that this can be fully evaluated before purchase.
Thannks.
-
Bill
-----Original
Message----- From: Corey, Rick [mailto:r...@dpconline.com] Sent: Tuesday, August 26, 2003 12:22 PM To:
'schwca'; m...@yahoogroups.com Subject: RE: [motoroladsp]
56800 SDK CAN driver
Hi schwca (?)
RE:
documentation for the "premium" MSCAN12 driver (which I would call a mini-application).
you said: << "Digital DNA" help
emails me back a response to contact one of the distributors for price
information>>
I browbeat salesmen and reps for weeks before
getting this doc. I thought their concept of "virtual pipes" was
bizarre and inappropriate to microcontroller, let alone DSP
applications. Whatever. It also did not support changing
message IDs 'on the fly'.
I hear there is an NRE
cost of $3000 USD, with no royalties. Ordering number is alleged to be:
ENGRCHGCAN. Good luck! (I hope this doesn't count as a "commercial" post!)
If anyone wants this doc, and it is not
attached to the Email you receive from the mail list, please Email me
privately and I will forward it.
I heard that some third party
developed it for them, and this is why it is expensive. They gave us
royal Heck when we asked to evaluate it, accusing us of wanting to copy the
code and not pay for it - when we were just asking for minimal examples of
how to configure the control registers.
The Email I got from
Daniel Malik (who found the doc and forwarded it to me) stated that one can
evaluate it by just signing an NDA. So far, *every* useful
answer I have gotten from D-DNA came from Daniel Malik.
I would love
to know your thoughts about this doc and driver (if you try it).
Would you like my sample code for configuring the peripheral?
Rick
Corey
-----Original Message----- From: schwca
[mailto:s...@saw.net] Sent: Tuesday, August 26, 2003 3:01 PM To:
m...@yahoogroups.com Subject: [motoroladsp] 56800 SDK CAN driverMotorola
does not place the SDK MSCAN drivers on the 2.5 or 3.0 CDs. SDK and
Motorola website says that they are "priced separately" but that's
all it says about it. "Digital DNA" help emails me back a response
to contact one of the distributors for price information. As I
expected, none of the distributors know anything about how to acquire
these files.
Do any of you know how to acquire the "priced
separately" drivers? At this point I'm thinking of figuring out
how to make the minimal functions of the CAN that I need without getting
the SDK.
Is CANOpen protocol available for DSP8600s?
Thanks _____________________________________ Note: If you do a
simple "reply" with your email client, only the author of this message will
receive your answer. You need to do a "reply all" if you want your
answer to be distributed to the entire group.
_____________________________________ About this discussion group:
_____________________________________ Note: If you
do a simple "reply" with your email client, only the author of this message will
receive your answer. You need to do a "reply all" if you want your answer
to be distributed to the entire group.
_____________________________________ About this discussion group:
RE: documentation for the "premium" MSCAN12 driver (which I would call
a
mini-application).
you said:
<< "Digital DNA" help emails me back a
response to contact one of the distributors for price information>>
I browbeat salesmen and reps for weeks before getting this doc. I thought
their concept of "virtual pipes" was bizarre and inappropriate to
microcontroller, let alone DSP applications. Whatever. It also did not
support changing message IDs 'on the fly'.
I hear there is an NRE cost of $3000 USD, with no royalties. Ordering number
is alleged to be: ENGRCHGCAN. Good luck! (I hope this doesn't count as a
"commercial" post!)
If anyone wants this doc, and it is not attached to the Email you receive
from the mail list, please Email me privately and I will forward it.
I heard that some third party developed it for them, and this is why it is
expensive. They gave us royal Heck when we asked to evaluate it, accusing
us of wanting to copy the code and not pay for it - when we were just asking
for minimal examples of how to configure the control registers.
The Email I got from Daniel Malik (who found the doc and forwarded it to me)
stated that one can evaluate it by just signing an NDA. So far, *every*
useful answer I have gotten from D-DNA came from Daniel Malik.
I would love to know your thoughts about this doc and driver (if you try
it). Would you like my sample code for configuring the peripheral?
Rick Corey
-----Original Message-----
From: schwca [mailto:]
Sent: Tuesday, August 26, 2003 3:01 PM
To:
Subject: [motoroladsp] 56800 SDK CAN driver
Motorola does not place the SDK MSCAN drivers on the 2.5 or 3.0 CDs.
SDK and Motorola website says that they are "priced separately" but
that's all it says about it. "Digital DNA" help emails me back
a
response to contact one of the distributors for price information. As
I expected, none of the distributors know anything about how to
acquire these files.
Do any of you know how to acquire the "priced separately" drivers?
At
this point I'm thinking of figuring out how to make the minimal
functions of the CAN that I need without getting the SDK.
Is CANOpen protocol available for DSP8600s?
Thanks
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author of
this message will receive your answer. You need to do a "reply all" if
you
want your answer to be distributed to the entire group.
_____________________________________
About this discussion group:
Motorola does not place the SDK MSCAN drivers on the 2.5 or 3.0 CDs.
SDK and Motorola website says that they are "priced separately" but
that's all it says about it. "Digital DNA" help emails me back
a
response to contact one of the distributors for price information. As
I expected, none of the distributors know anything about how to
acquire these files.
Do any of you know how to acquire the "priced separately" drivers?
At
this point I'm thinking of figuring out how to make the minimal
functions of the CAN that I need without getting the SDK.