Dear Narcis Palomeras When you install Code Composer Studio, it automatically install in the following folder: C:\ti\c5400\cgtools\bin But if you don't have CSStudio, I attach hex500.exe file for 5416 series with this email, you can use it. Best regards, Morteza Alizadeh NARCIS PALOMERAS ROVIRA <> wrote: Hello Morteza! Where can I buy or download a hex500.exe? I find in www.ti.com but I dont see anything! Thank you! Narc Palomeras Rovira UdG > Dear Ali, > Hi > The Hex file is the output file of Hex500.exe file the it create it from > out file of project. For program it to flash memory you must convert it to > a bin file and program your flash with any flash burner that can program > your flash. You can also download your flash memory driver for example in > C and run it on your DSP, to read bin file from PC and transfer it to > flash memory, for more description on Hex file format and how to create > them, plz check SPRU121.pdf (TMS320C54x Assembly Language Tools User's > Guide), Chapter 10, Hex Conversion Utility Description. You can find there > how to create Hex file and what exactly the Hex files contains means. > > Best regards, > Morteza Alizadeh > > ali rezaiye wrote: > hi all. > i read and simulation my program with 5402.and now i want to program it to > flash memory. > for provide hex file what shall i do? > my flash is 16*2M. > thanck's alot. > > --------------------------------- > > of this message will receive your answer. You need to do a "reply all" if > you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ Best regards, Morteza Alizadeh --------------------------------- Type: application/octet-stream |