hi, you must check the library wich contains that command(log_printf), maybe
you must to extract some sources or headers files from another file
that you need to can use that command,!
i had that problem with an example of codec for a 6201, it did not make
nothing, even print a message, until i'd extract a serie of libraries and
source files from a *.src file, then it'd works, try this way!!
Kevin Howson <k...@kanecomputing.com> wrote:
Hi,
We have a customer using the C6416 TEB with an
emulator and CCS. He is trying to run the first simple DSP/BIOS example and use
Log_printf() to print "Hello World". The code seems to run OK but nothing is
printed to the Message Log.
Has anyone got any ideas / seen this
before?
Thanks in Advance,
Kevin
_____________________________________ Note: If you do a simple "reply"
with your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to be distributed
to the entire group.
_____________________________________ About
this discussion group:
To Join: Send an email to
c...@yahoogroups.com
To Post: Send an email to
c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
gracias por su
atenci
Berenice R.
Mag
|