Reply by Jaime Andres Aranguren Cardona●November 17, 20032003-11-17
nch@kayser-threde.de (Chris Neumann) wrote in message news:<3bd76ae4.0311132343.4ce5c659@posting.google.com>...
> I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For
> a doughtercard design as well as mechanical integration I would like
> to have mechanical dimensions (location of the high density connectors
> and the mounting holes) for this board ( not available on AD's
> homepage :-( )
>
> Christian Neumann
But locatd in their ftp site. You'll have to browse through it. I
think it's in a 'Tools' folder, or something like that.
JaaC
Reply by Leon Heller●November 14, 20032003-11-14
Chris Neumann wrote:
> I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For
> a doughtercard design as well as mechanical integration I would like
> to have mechanical dimensions (location of the high density connectors
> and the mounting holes) for this board ( not available on AD's
> homepage :-( )
I got this document from ADI Customer Support:
Dev_Tools_EZ-Kit_Expansion_Interface_Specification_Rev_2_0[1]..pdf
It's got all the info you need. It's marked proprietary ADI only, so,
you'd better get your own copy.
Leon
Reply by Chris Neumann●November 14, 20032003-11-14
I've bought the BF533-EZLITE Evaluation Board from Analog Devices. For
a doughtercard design as well as mechanical integration I would like
to have mechanical dimensions (location of the high density connectors
and the mounting holes) for this board ( not available on AD's
homepage :-( )
Christian Neumann