Dear All,

Using 5510 dsk, Spectrum Digital,
In a hurry to drive EMIF bypassing DSP/BIOS but I can't see the CE pin changing in the write operation:
Here is main source file:
======================
#include
#include
#include
#include
#include

EMIF_Config emifCfg0 = {
0x022F, /* Global Control Register */
0xffff, /* Global Reset Register */
0x3FFF, /* CE0 Space Control Register 1 */

0x5fff, /* CE0 Space Control Register 2 */
0x0000, /* CE0 Space Control Register 3 */
0x1038, /* CE1 Space Control Register 1 */
0x0038, /* CE1 Space Control Register 2 */
0x0000, /* CE1 Space Control Register 3 */
0x1050, /* CE2 Space Control Register 1 */
0x0050, /* CE2 Space Control Register 2 */
0x0000, /* CE2 Space Control Register
3 */
0x1050, /* CE3 Space Control Register 1 */
0x0050, /* CE3 Space Control Register 2 */
0x0000, /* CE3 Space Control Register 3 */
0x2B11, /* SDRAM Control Register 1 */
0x0578, /* SDRAM Period Register */
0x0000, /* SDRAM Initialization Register */
0x0535 /* SDRAM Control Register 2 */
};

void CSL_cfgInit()
{

EMIF_config(&emifCfg0);
}

void main()
{

CSL_cfgInit();
EMIF_config(&emifCfg0);
EMIF_RSET(EMIRST,0xFFFFu);

while(1)
{

*(volatile int*)0x400001= 0xffff; //Writing 0xffff to address 0x400001

for (i=0;i<100;i++) //Just a delay between two write operations
j`;

*(volatile int*)0x400002= 0xffff; //Writing 0xffff to address 0x400002
}

}
Any ideas?

Mehdi Abolfathi,