Aravind-
> I m Aravind. I am using DSP processor
TMS320VC5502. I have written
> a code for receiving data from PC using UART module. I am now booting
> DSP from external I2C EEPROM. Can i get data from the same I2C EEPROM
> from a specified location using the I2C module of the DSP after the
> booting process is complete.
If DSP is master and EEPROM is slave, then yes it should be possible. You will
need
a) a data sheet for the EEPROM device and b) some example C55x I2C code. In
C55x
code you should be able to use CSL functions for I2C:
http://focus.ti.com/lit/ug/spru433j/spru433j.pdf
Chap 10.
-Jeff