--- In , "fjh001" <javier2945@h...> wrote: > Hello all, > > I'm trying to boot a 5402 from eeprom. The file I generate for EEPROM > burning with hex500 tool does not start with 0x08 0xaa as needed for > serial booting. I've tried several options with hex500, but not found > the way (also I'm very new to this DSP and its tools). > > Please could anybody point me on the right direction? > > Thank you very much. Best regards to all, > > Javier Herrero You should be able to use the -boot option either at the command line or within a hex utility command file (which is similar to a linker command file). This option tells the hex utility to convert all initialized sections found in the input file (the .out coff file output from the TI linker) to boot records. -Shawn |