Reply by Johnson, Jerry November 7, 20032003-11-07
RE: [motoroladsp] Explain timers use in ADC and SPI

With regard to the ADC sync signal, the normal usage is to synchronize the ADC capture with the PWM reload event.  That event can be used as an input to a timer which can then fire the ADC sync signal delayed from the PWM event.  Of course the timer can be synched to a different input, or the delay can be virtually eliminated by using a small count.

Jerry.

> -----Original Message-----
> From: TA1T [mailto:c...@hotmail.com]
> Sent: Friday, November 07, 2003 6:08 AM
> To: m...@yahoogroups.com
> Subject: [motoroladsp] Explain timers use in ADC and SPI
>
>
>
> Hello,
>
> The Quad timer is required for the ADC module and the SPI module for
> generating sync pulses.
>
>
> However, could somebody please explain what the sync pulses do with
> regards to the ADC and the SPI modules. (Or how the quad timer is
> used in these applications) 
>
> Thanks
>
>
> ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
> Printer at MyInks.com. Free s/h on orders $50 or more to the
> US & Canada.
> http://www.c1tracking.com/l.asp?cidU11
> http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PNArlB/TM
> --------------------------
> -------~->
>
> _____________________________________
> Note: If you do a simple "reply" with your email client, only
> the author of this message will receive your answer.  You
> need to do a "reply all" if you want your answer to be
> distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join:  m...@yahoogroups.com
>
> To Post:  m...@yahoogroups.com
>
> To Leave: m...@yahoogroups.com
>
> Archives: http://www.yahoogroups.com/group/motoroladsp
>
> More Groups: http://www.dsprelated.com/groups.php3

>
> " TARGET="_blank">http://docs.yahoo.com/info/terms/
>
>
>
> ______________________________________________________________
> __________
> This email has been scanned for all viruses by the MessageLabs SkyScan
> service. For more information visit http://www.messagelabs.com
> ______________________________________________________________
> __________
>


________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information visit http://www.messagelabs.com
________________________________________________________________________
Reply by TA1T November 7, 20032003-11-07

Hello,

The Quad timer is required for the ADC module and the SPI module for
generating sync pulses. However, could somebody please explain what the sync pulses do with
regards to the ADC and the SPI modules. (Or how the quad timer is
used in these applications)

Thanks