RE: [c6x] Help required DSK6711 MIC interface
Are you using a powered microphone? If you have a
standard PC mic it assumes power comes from the sound card ... the DSK is not a
sound card and does not provide phantom power to the mic. You need to use
a powered microphone! In fact, Radio shack has one that looks a standard
PC electret mic and uses 2-3 AAA batteries in the base.
Regards,
Tom Dillon
-----Original Message-----
From: zee_shan_anwar [mailto:z...@yahoo.com]
Sent: Wednesday, June 18, 2003 12:50 AM
To: c...@yahoogroups.com
Subject: [c6x] Help required DSK6711 MIC interface
Hi all,
I am using DS6711 for my audio application development.
But,
unfortunately, I am unable to get any data from the MIC
interfact of
codec using AD535_read function of DSK6711 board support
library.
When I run the confidence test, I get success in all the
steps. when
I run the confidence test present in
\examples\dsk6711
\board_util\conftest\cnfdsp_nohost, I get the following
results for
codec confidence test
CODEC TEST
Play 1KHz tone......
Success.....
Play CD/MIC input.....
Success.....
however, if i speak in MIC during "Play CD/MIC
input", I get nothing
in my speakers. Can anyone please clarify me the problem in
my
system i.e. is the MIC interface, codec or the software is
problematic???
Best Regards,
Zeeshan Anwar
_____________________________________
Note: If you do a simple "reply" with your email
client, only the author of this message will receive your answer. You need
to do a "reply all" if you want your answer to be distributed to the
entire group.
_____________________________________
About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send an email to c...@yahoogroups.com
To Leave: Send an email to c...@yahoogroups.com
Archives: http://www.yahoogroups.com/group/c6x
Other Groups: http://www.dsprelated.com
" TARGET="_blank">http://docs.yahoo.com/info/terms/
|