Jeff Brower wrote: > Abhijeet- > > I have posted your question to the c54x Group. > > I think you should ask a specific question about the -mf (far mode) linking error -- > then you will get some help. > > -Jeff > > We are working in C5409. Our program is very large and presently We > are using c5409 DARAM for both data and program. below is our > command linking file configuration. > > Please suggest us the configuration of the link file and if any other > setting is required. We want to use address 0x18000-0x28000 for our > program. > > if we use -mf option to get extended memory page. In this we are getting linking > error. > > -stack 0x380 > Did you change your stack size in the linker configuration dialog? In my setups it has -stack0x400 passed to the linker (matching my stack size of 0x400). You should try setting the stack to 0x380 in your configuration and see if that fixes it. Brian -- ----------------- Brian C. Lane (W7BCL) Programmer www.shinemicro.com RF, DSP & Microcontroller Design |