> I have PCM3003 daughter card. When I was trying > to get 32bit rate , I
> lost my samples, I set jumper 11 and 12 pin 3-4 ,
> default settings is
> jumper 11 pin 5-6 and jumper 12 3-4 .
ok - you switched the jumpers - but did you actually
change the setting of McBSP for reading 32-bit long
samples?
> Acturally my program works well for the 16 bit
> case , what is the
> problem , thanks .
are you asking us what the problem is? ;-) we don't
know - if your program works with 16 bits and that's
all you need - then there is no problem to me ;-)
__________________________________
Reply by Aizezi Abuding●June 28, 20032003-06-28
Hi !
I have PCM3003 daughter card. When I was trying to get 32bit rate , I
lost my samples, I set jumper 11 and 12 pin 3-4 , default settings is
jumper 11 pin 5-6 and jumper 12 3-4 .
Acturally my program works well for the 16 bit case , what is the
problem , thanks .
******************************************
-----
Address:
Aizezi. Abuding
Volrat thamsgatan 20-3331
Goteborg 41260
Sweden