I have been using the New Micros JTAG 14-Pin cable for about a month
now without a problem. I am using it with my DSP56858EVM.
The only thing that I had to do was disable the on-board Parallel JTAG
Host/Target Interface by placing a jumper on JG5
(DSP56858EVM).
I was also a little disappointed in the lack of any
documentation. It works great though and I have no
complaints.
Louis
-----Original Message----- From: Jacob Christ [mailto:j...@pontech.com] Sent:
Thursday, December 11, 2003 8:25 AM To: m...@yahoogroups.com Subject: [motoroladsp] NewMicros JTAG
I just got my NewMicros 14-Pin JTAG port and was
disapointed that it didn't come with any documentation (nor could I
find any on the New Micros web page). Does anyone know that has used
it know if the 14 pin connector matches the pinout of the Motorola Eval
boards?
Jacob Christ www.pontech.com
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
Reply by Roberto Bonacina●December 12, 20032003-12-12
If go in the New Micros site, you will find that the JTAG port is
suggested for some New Micros specifical products (for example,
NMIN-0803-H3).
In the NMIN-0803-H3 PDF schematics, the J7 connector will let you
derivate the JTAG port pinout.
Roberto Bonacina
-----Messaggio originale-----
Da: Jacob Christ [mailto:]
Inviato: gioved11 dicembre 2003 15.25
A:
Oggetto: [motoroladsp] NewMicros JTAG
I just got my NewMicros 14-Pin JTAG port and was disapointed that it
didn't come with any documentation (nor could I find any on the New
Micros web page). Does anyone know that has used it know if the 14
pin connector matches the pinout of the Motorola Eval boards?
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author
of this message will receive your answer. You need to do a "reply
all"
if you want your answer to be distributed to the entire group.
_____________________________________
About this discussion group:
We use the NewMicros as a replacement for Motorola JTAG converter for a long
time without any problem (completely connector-compatible).
If I well remember, you must insert the key-pin (pin 8) in the connector
yourself.
Kind regards,
Wim de Haan
Exendis B.V.
W.J. de Haan
P.O.box 56, 6710 BB Ede
Keesomstraat 4, 6716 AB Ede
The Netherlands.
Tel: +31-(0)318 - 676305
Fax: +31-(0)318 - 676319
mailto:
URL: http://www.exendis.com <http://www.exendis.com/>
-----Original Message-----
From: Jacob Christ [mailto:]
Sent: donderdag 11 december 2003 15:25
To:
Subject: [motoroladsp] NewMicros JTAG
I just got my NewMicros 14-Pin JTAG port and was disapointed that it
didn't come with any documentation (nor could I find any on the New
Micros web page). Does anyone know that has used it know if the 14
pin connector matches the pinout of the Motorola Eval boards?
_____________________________________
Note: If you do a simple "reply" with your email client, only the
author of
this message will receive your answer. You need to do a "reply all" if
you
want your answer to be distributed to the entire group.
_____________________________________
About this discussion group:
I just got my NewMicros 14-Pin JTAG port and was disapointed that it
didn't come with any documentation (nor could I find any on the New
Micros web page). Does anyone know that has used it know if the 14
pin connector matches the pinout of the Motorola Eval boards?