--- omnia_mohsen <> wrote: > so how > can this file listed below can be added to my > project in ccs? in CCS you are not supposed to be adding header (*.h) files to the project manually... all you have to do is to include that file in your source code (by #include "file.h") and then it's being added to the project while building it or when you choose "scan for dependencies" - there is an explanation about it somewhere in the DSK doccumentation... > how can the audio daughter card be used or > added to the project in ccs ? i mean is there a > program or something > to tell how i can take my output with sampling rate > 48000 from this daughter card, well... I'm not aware of any programs or any other way of adding the audio card to the CCS project except the solution of setting the McBSP1 manually with appropriate values for the transmission... on the other hand - I've heard of some third party "builders" that simplify creating applications for C6711 - I've personally never used anything other than the CCS... > please if there is a certain site > talking about this > in details , name it for us coz we could not find > enough information about this at the TI site. well - I will probably dissapoint you here as well... I'm not aware of any helpful sites other than ti.com - I agree however that it's damn hard to get started with TI's DSPs - I think the problem is that there is no single manual to follow while learning - instead - there is a whole bunch of documents - for a beginner - it's really difficult to go through all that... > sorry for hte long mail but we really need help > urgently and if > anybody can give us any help this will be > appriciated.. well - if you're deadline is in a week or even in a month - then man - you're in trouble... from your questions I gathered you're just starting with the DSK - then there is a long learning curve ahead of you... well - best of luck to you! if you have any further specific questions - feel free to ask... __________________________________ |