Reply by jjnews2000 ●June 8, 20042004-06-08
Hi everybody,

I'm trying to realise an interrupt generated by the timer but
unfortunately the code lines included in the interrupt program (i
hope
this is clear enough)are never done.
I read the documentation about the timer and also about interrupts,
but i don't succeed in understanding how i must tell the DSP to go to
my interrupt program whenever the interrupt generated by the timer
happens.
Can someone give me a code example (in C if it's possible) so that i
understand (with explanations too). Thank you very much.

Here is a sample of my code. I f you see something wrong please tell
me about it.

"
void main(void)
{
brd_init(100);

*(volatile unsigned int *)0x0007 |=0x0800;
*(volatile unsigned int *)0x0007 &=0xFEFF;
*(volatile unsigned int *)0x001D =0x00F8;
*(volatile unsigned int *)0x0000=0x0000;
*(volatile unsigned int *)0x0001=0xFFFF;

*(volatile unsigned int *)0x0026 |=0x0010;
*(volatile unsigned int *)0x0025=0xC34F;
*(volatile unsigned int *)0x0026 |=0x0001;
*(volatile unsigned int *)0x0026 |=0x0020;
*(volatile unsigned int *)0x0000 |=0x0010;
*(volatile unsigned int *)0x0007 &=0xF7FF;
*(volatile unsigned int *)0x0026 &=0xFFEF;
for(;;);

}

interrupt void toz (void) /* Here i don't know how to declare this */
{

*(volatile unsigned int *)0x0007 &=0xDFFF; /* bit
XF=0 */
*(volatile unsigned int *)0x0007 |=0x2000; /* bit
XF=1 */

}
"

I removed the comments because they were in French.

Hope someone can help me once again.

Thanks.

Jerome