Reply by Bende Georg ●January 9, 20042004-01-09
Don't have to pay - it is included with the SDK. :)
(See it in the SDK subdirctory under
"\Embedded SDK\src\dsp56805evm\nos\applications\serial_bootloader\"
(Actually the DSP is originally delivered with a boot flash that allows download
throught the SCI0 port - v1.0 has 19200 bps, v1.1 has 115200 bps.
I'm actually developing my own because I need advanced features like CRC
checking and own download protocol - but the one included is OK as well.

Georg Bende
Softwareentwickler
Abteilung Elektronik
Dr. Fritz Faulhaber GmbH & Co KG
Daimlerstr. 23
71101 Schaich
Tel: +49 7031 638294 > -----Ursprgliche Nachricht-----
> Von: douglasholub [mailto:]
> Gesendet: Freitag, 9. Januar 2004 04:58
> An:
> Betreff: [motoroladsp] download to PFLASH via the SCI port > I'd like to be able to program my DSP56F805 via the SCI port instead
> of using the JTAG interface. Has somebody out there already written
> some boot code that will do that? I would be willing to pay for it.
>
> Regards,
>
> Doug Holub
> Irving, Texas > _____________________________________
> Note: If you do a simple "reply" with your email client, only
> the author of this message will receive your answer. You
> need to do a "reply all" if you want your answer to be
> distributed to the entire group.
>
> _____________________________________
> About this discussion group:
>
> To Join:
>
> To Post:
>
> To Leave:
>
> Archives: http://www.yahoogroups.com/group/motoroladsp
>
> More Groups: http://www.dsprelated.com/groups.php3 >