Reply by Petar Ristanovic ●May 31, 20022002-05-31
Hello,

I am interested to know whether there are any special requirements
(standards) for DSP projects, concerning documenting the source,
implementation, algorithms. If there are standards, I would like to
know what these standards are, as well as where I can find more about
them (I know IEEE1016).

Regards,
Petar Ristanovic
----------------------------------
DAC - Software Development, Quality and Documentation Tool
----------------------
Petar Ristanovic Tel ++ 41 (0)1 883 35 70
RistanCASE GmbH Fax ++ 41 (0)1 883 35 74
Zielackerstrasse 19 e-mail
CH-8304 Wallisellen www: http://www.RistanCASE.com
----------------------------------

Reply by jrao09 ●February 13, 20022002-02-13
Hi Friends,

I am using OMAP Code Composer studio 2.0 and DSC21 EVM board.

I have a problem loading the program on to the target board.

Following is the Error message

"Data Verification failed at address ...." "...." is the address
which I specify for the ".text" portion. and this error comes
irrespective of the address I specify for the purpose.

If I ignore the message and proceed, it finally gives the following
error message
"Trouble Writing Target CPU memory: Cannot set/verify breakpoint at
0x800386C
Can't Remove Breakpoint: Cannot set/verify breakpoint at 0x800346C"

I have defined the memory exactly as specified in the documentation.

Can any one help me out on this

Regards,
Jogeswara Rao