Ravikiran DN- > I am just using my P4 pc with MIC as input. I am reading data > with wavrecord. My original idea is to interface my TV cable directly > to the computer using MATLAB. Atleast a sampling rate of 100MHz is > necessary. Is it possible with my configuration? I am also ready to > use assembly language to get it. Well, a mic input is not good for more than 20 kHz or so bandwidth. For 100 MHz sampling, I think you will need some type of plug-in video/imaging card. It's more of a hardware issue than software; that's a fast rate and you have signal integrity and noise issues to deal with, especially in a PC environment. Maybe the Data Acquisition toolbox and TMW's supported hardware recommendations would be some things to look at. Jeff Brower system engineer Signalogic > ---------------------------------- > What data acq/DSP board are you using? The hardware and underlying > driver/library > makes all the difference. > > Jeff Brower > system engineer > Signalogic > > ---------------------------------- > Ravikiran Dn- > > i am not able to obtain a sampling rate more than 110 kHz > using MATLAB or BORLAND C++ 5. If I use more than 1 MHz sampling > rate, then more and more samples has the same value; getting a random > step waveform. If any body knows how to obtain higer sample rates of > the order of 1GHz, pls help me. If it is impossible to obtain that > much rates pls inform me abt the limitions of A-D converter/PC. |