|
Hi, I am using the DSKPlus (DSKStarter kit - TMS320C542) for 4 months. Its code is generated by the dskplasm, an assembler for the kit. I am translating some codes from dskplasm to CCS but I do not know how can I send the .out file (dskplasm generates .obj) since the loader application which came with the DSK Board only works whit .obj code generated by the dskplasm assembler. I would like to know if someone have already faced the same problem and how I can upload code (generated code - .out file) from ccs to the DSKPlus board. P.S.: The DSKPlus board uses the parallel port to communicate. Thanks! ===== ------ RODRIGO DE PAULA RODRIGUES Graduando em Engenharia da Computao Universidade Federal de Itajubbr /> http://www.polarhome.com:723/~rprworld/ ICQ: 152477421 MSN: SKYPE: rprodrigues ------- _______________________________________________________ Yahoo! Acesso Gris - Internet rida e gris. Instale o discador agora! http://br.acesso.yahoo.com/ |