Hi all, Even the same thing I also observed as satheesh. But there is a solution for this. Instead of giving 'RUN' use 'MULTIPLE OPERATION' . In this way code-composer will do single stepping, the number of times 'MULTIPLE OPERATION' you have set. This time is perfect, and I have cross checked it manually. rgds, shashi satheesh wrote: > Hi > The issue of finding execution time is a bit tricky if u r using code > composer studio. I've found that the CCS gives a larger-than-actual time > estimate. The way I prefer is as follows:(Needs a CRO and some probing) > 1)Just before u enter the routine assert HINT by programming HPIC. > 2)Once the host clears this interrupt, ur fft code should execute. > 3)After the execution of the fft code, again assert HINT. > > By probing the HINT pin and finding the time difference between HINT going > high and HINT going low, we get the actual time taken for execution. > regards, > satheesh > > -----Original Message----- > From: [mailto:] > Sent: Saturday, January 13, 2001 9:25 AM > To: > Subject: [c54x] execution time > > Hi All, > > Pls let me know how to find the execution time to process an fft algorithm > in TMS320C542 Dskplus Starter Kit. > Thanks and regard > Poorva > > ---------------------------- > Get your free email from AltaVista at http://altavista.iname.com > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of > this message will receive your answer. You need to do a "reply all" if you > want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.egroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.egroups.com/group/c54x > > Other Groups: http://www.dsprelated.com -- ****************************************************** SHASHI KANT SINGH Senior Software Engineer Telecom and Internetworking solutions (Lucent BU) Wipro Technologies, Bangalore, INDIA Address (O) : 4th Floor,'Creator' Block ITPL, Whitefield Bangalore - 560066 Ph: 91-80-8411990-1429 WIPRO TECHNOLOGIES - The World's First SEI CMM Level 5 Software Services Company ********************************************************* |