Evandro,

It looks like the error message came with the EVM installed on the PCI bus - when you do this, you must set the address to 0.

Also, try evm reset...

Refer to ti/docs/pdf/spru269.pdf [and spru305 for tech details].

mikedunn

dasvolpas <e...@ele.ufes.br> wrote:

Hi,
I am trying to install the EVM 6201 in a PC (over Win95 and Win98 ).
I tested in onboard and offboard motherboard PC but experiment the
same error message for all combinations PC - OS:
CAN'T INITIALIZE THE TARGET CPU
CAN'T INITIALIZE THE JTAG CONTROLLER
PLEASE ENSURE THE I/O PORT IS SET PROPERLY AND THERE ARE NO H/W
CONFLICTS.
I/O PORT = 240.
BOARD NAMExx EVM (TEXAS INSTRUMENTS)
CPU NAME: CPU_1

I've used the driver that comes with the CCS CD and I try both CCS
versions (1.2 and 2.0). There is no I/O conflict.

Could anyone experiment the same problem?
Thanks in advance, Evandro.
_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to c...@yahoogroups.com

To Post: Send an email to c...@yahoogroups.com

To Leave: Send an email to c...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com

Hi, I am trying to install the EVM 6201 in a PC (over Win95 and Win98 ). I tested in onboard and offboard motherboard PC but experiment the same error message for all combinations PC - OS: CAN'T INITIALIZE THE TARGET CPU CAN'T INITIALIZE THE JTAG CONTROLLER PLEASE ENSURE THE I/O PORT IS SET PROPERLY AND THERE ARE NO H/W CONFLICTS. I/O PORT = 240. BOARD NAMExx EVM (TEXAS INSTRUMENTS) CPU NAME: CPU_1 I've used the driver that comes with the CCS CD and I try both CCS versions (1.2 and 2.0). There is no I/O conflict. Could anyone experiment the same problem? Thanks in advance, Evandro.