Eran, Check in Project->Build Options -> Linker, and be sure that there is no library specified in the "include libraries" text box. When I opened blink, rts.lib was included there, which was causing the problems. Once it was removed, the project built properly. Regards, Dan -----Original Message----- From: eran segev [mailto:] Sent: Tuesday, February 26, 2002 12:58 PM To: Rinkes, Dan; Subject: RE: [code-comp] Linking problems when using far mode Dan, After failing to link my original and complicated code I tried to compile and link the simple blink example, using the -mf flag and that too does not work. I can't think of something simlier then that. Thanks Eran --- "Rinkes, Dan" <> wrote: > Eran, > > Is it all C code that you are using, or is there > some assembly? When you're > compiling C code, and you use the -mf switch, there > is a directive created > in the generated assembly file that tells the linker > that this is a far > model .obj file. If you're linking in your own > assembly functions, you need > to specify the directive also. I can't remember off > the top of my head what > the directive is, but you can find out by keeping > the .asm filesn generated > by the compiler and finding out what the directive > it adds is. > > Regards, > Dan Rinkes > Texas Instruments > > -----Original Message----- > From: eran segev [mailto:] > Sent: Tuesday, February 26, 2002 1:09 AM > To: Rinkes, Dan > Subject: RE: [code-comp] Linking problems when using > far mode > > Dan, > I forgot to mantion it but I do also use rts_ext.lib > Eran > > --- "Rinkes, Dan" <> wrote: > > Eran, > > > > Just curious, are you also using the rts_ext.lib > for > > your runtime library? > > Each library must be of the same type, either far > > model or near model. > > > > Regards, > > Dan Rinkes > > Texas Instruments > > > > > > -----Original Message----- > > From: eran segev [mailto:] > > Sent: Monday, February 25, 2002 2:06 PM > > To: > > Subject: [code-comp] Linking problems when using > far > > mode > > > > Hi group, > > I'm using CC2.0 for the 5402 processor. > > The problem I have appear when I try to compile > and > > link my code using -mf (far mode). > > While linking I get this annoying warning: > > "linking incompatible formats: file compiled with > > -mf" > > and the linker treats this warning as an error. > > It does not help if I use the far libraries: > > drv5402f.lib , dsk5402f.lib > > Does any one have any Idea? > > Anything would be helpful > > Thanks in advance > > Eran > > > > > > > > > > > > > > _____________________________________ > > Note: If you do a simple "reply" with your email > > client, only the author of > > this message will receive your answer. You need > to > > do a "reply all" if you > > want your answer to be distributed to the entire > > group. > > > > _____________________________________ > > About this discussion group: > > > > To Join: > > > > To Post: > > > > To Leave: > > > > Archives: > http://www.yahoogroups.com/group/code-comp > > > > More Groups: http://www.dsprelated.com > > > > > > ">http://docs.yahoo.com/info/terms/ > > > > > > > > __________________________________________________ > __________________________________________________ _____________________________________ Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. _____________________________________ About this discussion group: To Join: To Post: To Leave: Archives: http://www.yahoogroups.com/group/code-comp More Groups: http://www.dsprelated.com ">http://docs.yahoo.com/info/terms/ |