> Kenneth said:
>
>>> I have noticed that using the printer port with the DSP56858EVM
does seem
> to "scramble" the port and/or driver so that itno longer
recognizes my
> printer. I use a switch box to change connections between the printer
and
> the EVM. So far, I find rebooting the only way to restore the printer
driver
> to functionality <<
>
> Thanks for the help, Kenneth, but it's worse than that for me! Even if
nothing
> is plugged in to the parallel port, the IAR dongle simply won't work
any
> more.
>
> Maybe I'll have to try uninstalling Codewarrior or maybe reinstalling
the IAR
> compiler.
--
Check out the codewarrior.* usenet newsgroups
for assistance with your programming questions.
>> I have noticed that using the printer port
with the DSP56858EVM does seem to "scramble" the port and/or driver so that itno longer
recognizes my
printer. I use a switch box to change connections between the printer and
the EVM. So far, I find rebooting the only way to restore the printer driver
to functionality <<
Thanks for the help, Kenneth, but it's worse than that for me! Even if
nothing
is plugged in to the parallel port, the IAR dongle simply won't work any
more.
Maybe I'll have to try uninstalling Codewarrior or maybe reinstalling the
IAR
compiler.
Cheers,
Rob.
Reply by Kenneth Ciszewski●February 15, 20042004-02-15
I have noticed that using the printer port with the DSP56858EVM does seem
to "scramble" the port and/or driver so that itno longer recognizes my
printer. I use a switch box to change connections between the printer and
the EVM. So far, I find rebooting the only way to restore the printer
driver to functionality
r...@apostrophe.co.uk wrote:
Hi Folks,
I tried posting this from
e-mail and it didn't work, so am trying it via the web site -
apologies if it appears twice.
------------------
Anyone
had a go with V6 of Codewarrior? I installed the 8k free version on
my computer and it's completely screwed up my IAR parallel port
dongle for the MSP430!
You can see now that
when the PC boots up it runs this program that does a parallel
port negotiation which I suspect is taking all of the parallel port resources and not allowing any other program access to the parallel port.
I know it's not a problem with the dongle as
I've tried it on a different computer which recognises it [the
dongle] no problem.
Has anyone else had any
issues with V6 Codewarrior and the parallel port, and if so,
what did you do to solve it?
Many thanks,
Rob.
_____________________________________ Note: If you
do a simple "reply" with your email client, only the author of this message will
receive your answer. You need to do a "reply all" if you want your answer
to be distributed to the entire group.
_____________________________________ About this discussion group:
I tried posting this from e-mail and it didn't work, so am trying it via
the
web site - apologies if it appears twice.
--------\
----------
Anyone had a go with V6 of Codewarrior? I installed the 8k free version
on my
computer and it's completely screwed up my IAR parallel port dongle for
the
MSP430!
You can see now that when the PC boots up it runs this program that
does a
parallel port negotiation which I suspect is taking all of the parallel port
resources and not allowing any other program access to the parallel
port.
I know it's not a problem with the dongle as I've tried it on a
different
computer which recognises it [the dongle] no problem.
Has anyone else had any issues with V6 Codewarrior and the parallel
port, and
if so, what did you do to solve it?