Maybe the DSPs are held in reset and the DSPs need to be brought out of reset for CCS to initialize. -Albert gagan2172 wrote: > > Hi All, > I am getting this problem as shown in the subject line. > I am using flexds emulator on my hardware setup. In my setup eight > 5510 DSPs of silicon ver 1.2 are tied to single JTAG port. All the > JTAG test of xdsprobe are passed . But on trying to start the CCS > using target emulator this problem comes. In the TI erratica they > descibes a workaraound of adding BYPASS. But that is for the 5510 > silicon version 2.0. Here In my case the processors in my board are > of version 1.2. > Kindly do let me know if some body face > similar problem. Are the latest emulator can work on any of the > silicon version of the 5510. May it be 1.2 or 2.0 ... > > Regards, > Gagan > > Yahoo! Groups Sponsor > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the > author of this message will receive your answer. You need to do a > "reply all" if you want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c55x > > Other Groups: http://www.dsprelated.com |