> --- realyvirtual <> wrote:
> > i am using C6711 dsk as test environment. it has
> > AT29LV010A Flash on
> > it which has 128 KB of capacity. is there any way, i
> > can replace this
> > flash with AT29LV040A. both of the flash have same
> > pin configuration.
> > how can i replace AT29LV010A with AT29LV040A on
> > C6711DSK.
>
> hm... I don't really know if I get your question
> correct... are you asking about physical way of
> removing chip from the board and placing another one?
> You said both chips have the same pin configuration -
> if so - there is no problem - just remove the old one
> and solder the new one...
>
> before doing it I'd made sure that there is enough
> space in the memory space for a bigger one...
If additional address lines are required he can jumper from the daughterboard
connectors.
Jeff Brower
system engineer
Signalogic
Reply by Wojciech Rewers●August 25, 20032003-08-25
--- realyvirtual <> wrote: > i am using C6711 dsk as test environment. it
has
> AT29LV010A Flash on
> it which has 128 KB of capacity. is there any way, i
> can replace this
> flash with AT29LV040A. both of the flash have same
> pin configuration.
> how can i replace AT29LV010A with AT29LV040A on
> C6711DSK.
hm... I don't really know if I get your question
correct... are you asking about physical way of
removing chip from the board and placing another one?
You said both chips have the same pin configuration -
if so - there is no problem - just remove the old one
and solder the new one...
before doing it I'd made sure that there is enough
space in the memory space for a bigger one...
all that is just my general knowledge - I don't know
anything about AT29LV0x0A chips...
__________________________________
Reply by realyvirtual●August 25, 20032003-08-25
HI!
i am using C6711 dsk as test environment. it has AT29LV010A Flash on
it which has 128 KB of capacity. is there any way, i can replace this
flash with AT29LV040A. both of the flash have same pin configuration.
how can i replace AT29LV010A with AT29LV040A on C6711DSK. any advice
or reference material.. would be very helpfull.