Hi,
I
guess he is asking how to put a matlab code in to a user defined simulink
block using S functions rather tha using the blocks given by MATHWORKS.
I implemented a few blocks for GPS simulation using matlab code and then
converted them to user defined simulink blocks using s functions. The main
thing is that in the s function demos using matlab files , MATHWORKS did
not mentioned that teh user defined blocks will not accept more than 1
input. also the input shoule be real . So you have to put a MUX before your
block to couple all the inputs and in the s fucntin code you ahegv tos eperate
teh inputs and do the processing and give it to output. U have to put a
demux at the output to seperate the different outputs.
Hope it helps.
Regards,
-SaiRamesh.
Snehamoy
Banerjee <s...@yahoo.com> wrote:
Hi,
I am not sure as to
which version of MATLAB you are using. However, if you happen to lay your
hands on version 6.5, then WCDMA is lot more easy to implement. There
are demos which are present and can be modified to suit your requirement. I
have found it pretty cool to simulate WCDMA in Simulink bundled with MATLAB
6.5. Sufficient help is also provided with it.
If
you still need help, then visit the Mathwork site for the pdf files that
you are looking for.
-Snehamoy
--- ehsan azordegan
<e...@yahoo.com> wrote: > hi! > i have write a wcdma
mobile link in matlab,each > block with seperate m- > file ,i am
new in simulink and i should change it > into simulink,most >
of inputs and outputs are matrices (1xn),i have read > s-function > help ,but i
couldn't undrestand alot,i will be > pleased if you suggest > any link or pdf attached for me to start, > thanks, >
Ehsan__________________________________
_____________________________________ Note: If you do a simple
"reply" with your email client, only the author of this message will receive
your answer. You need to do a "reply all" if you want your answer to be
distributed to the entire group.
_____________________________________ About this discussion group:
To Join: m...@yahoogroups.com
To Post:
m...@yahoogroups.com
To Leave: m...@yahoogroups.com
Archives: http://www.yahoogroups.com/group/matlab
More DSP-Related
Groups: http://www.dsprelated.com/groups.php3
">Yahoo!
Terms of Service.
|