Reply by Matt Polak August 29, 20032003-08-29
At 09:43 PM 8/28/2003 -0700, Mike Dunn wrote:
>Chen,
>
>I do not have anything to read a protel schematic - can you convert to pdf??

Protel is my bread and butter! Here's a PDF conversion!

Regards,
-- Matt


Attachment (not stored)
jtagsch.pdf
Type: application/pdf

Reply by Mike Dunn August 29, 20032003-08-29
Chen,
 
I do not have anything to read a protel schematic - can you convert to pdf??
 
Also, what emulator do you have??
If it is a TI, try running xdsprobe with the -c option for about 2 mins to see if it detects any errors.
 
mikedunn

Chen Cerdar <c...@hotmail.com> wrote:
hello everyone.
I have designed a board with 2 C6711B150. But when i startup ccs, it says
it can not initialize CPU.Sometimes it can not initialize CPU_2, sometimes
it can not initialize CPU_1, and sometime it can not initialize both.

My schematic is JTAG.SCH.
Bootmode = 00.

What is the matter?
_____________________________________
Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group.

_____________________________________
About this discussion group:

To Join: Send an email to c...@yahoogroups.com

To Post: Send an email to c...@yahoogroups.com

To Leave: Send an email to c...@yahoogroups.com

Archives: http://www.yahoogroups.com/group/c6x

Other Groups: http://www.dsprelated.com
> ATTACHMENT part 2 application/octet-stream name=JTAG.SCH



Reply by Chen Cerdar August 28, 20032003-08-28
hello everyone.
I have designed a board with 2 C6711B150. But when i startup ccs, it says
it can not initialize CPU.Sometimes it can not initialize CPU_2, sometimes
it can not initialize CPU_1, and sometime it can not initialize both.

My schematic is JTAG.SCH.
Bootmode = 00.

What is the matter?


Attachment (not stored)
JTAG.SCH
Type: application/octet-stream