hi all.
I develop a small development system (D.S.) for the DSP56303PV100
and I want to know if there is any way to download a program to the D.S.
through the DSP56303EVM debugger. We tried attaching the DSP56303 JTAG pins in
the D.S. to the Command converter pins in the DSP56303EVM, that is, to the
DSP56002 pins in the command converter in the EVM (as the EVM schematics shows
for the DSP56303 in the EVM), but it didn't work at all. I wonder if there
is another consideration that we have to take in order to run an aplication in
this way.
I hope this information is clear, and that you can help me.
Regards, Hernan Dario Herrera T. Asistente de Investigaci Pontificia Universidad Javeriana Cali - Colombia |