Hi,
The problem is due to stack is over written by other values. The main
reason for this error is Stack is corrupted.
To rectify the problem make sure that you have enabled memory mapping option
which is present under options in the menu bar.
Regards
Sridhar. A
Hellosoft India Pvt. Ltd
Hyderabad.
p...@yahoo.com wrote: Hi,
I got same the error. But i am running in simulator.
Is it because of .cmd file?
Expecting solution for this.
Regards,
gnanavelu
>
>
>
>
>hi,
>
>1) check that connection between dsp and jtag is
>proper.
>2) check that jtag is getting power
>3) run the emulator diagnostics to see that emulator
>detects the device correctly.
>4) try switch off and switch on of the entire setup
>
>regards,
>Dileepan.
>--- jaga_lemonde <> wrote:
>
>>
>>
>>
>> Hi,
>> I am working in g.729 using TMS320C5402 target.
>> In the encoder section,Once I run the program i face
>> the following error.
>>
>> The Error is
>> Trouble Running Target CPU: Error Number -2600 Error
>> address -3
>>
>> give your suggestion to overcome this error.
>>
>>
---------------------------------
Check out what you're missing if you're not on Yahoo! Messenger