Hernan, Command Converter Server has nothing to do with a device chain. It allows multiple machines to debug through a single host machine via TCP/IP. It's also a required component in recent versions of Suite56 (i.e. the debugger will not work without it running). Section 7 of the ADS User's Manual describes how to configure each device in the chain and how to control which device you are debugging... -- dB --- Hernan Dario Herrera <> wrote: > The daisy chain is set up like this. All TMS conected to one common > TMS, all TCK conected to one common TCK. all TRST conected to one > common TRST. TDO conected to the TDI of the next DSP, so the TDI of > the first DSP and the TDO of the last DSP are conected to the > Parallel Port Command Converter. > > ok. but how can I do to download code to the DSP? where can I find > information about this?? I already check the Suite56 manuals and the > only thing they say is that is compatible. but it doesn't say > anything about configuring stuff, or if the parallel command > converter server is what I need. I find other docs that say the > parallel command converter is used to do this and that. but they > don't explain how either. > > if anyone knows ahow to configure things in Suite56 to interact with > the system, Id apreciate it. > > thanks > dbaudiopro <> wrote: > Hernan, > > If the daisy chain is connected properly you can communicate with any > of the three DSPs individually using Suite56. And yes Suite56 (ver. > 6.3 > and higher) was designed to work with the Parallel Port Command > Converter... > > -- > dB > > --- Hernan Dario Herrera wrote: > > > Hi all. > > > > I have a three DSP56303 system interconected by a JTAG daisy chain. > > Also, I have attached to the first DSP the parallel port command > > converter (the one with two 74xx244), that translates voltage from > 5V > > TTL in the paralell port of a host computer to 3.3V CMOS levels on > > the DSP signals for JTAG. > > > > I need to know if with this configuration I can download a code to > > the DSP I want (any of the three). > > And I also want to know if that parallel port command converter is > > compatible with Suite56 tools. I guess it is, but I just don't know > > what I have to do to make it work. > > > > thanks > > Hernan > > > > > > > > --------------------------------- > > > > > > __________________________________ > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the > author of this message will receive your answer. You need to do a > "reply all" if you want your answer to be distributed to the entire > group. > > _____________________________________ > About this discussion group: > > To Join: > > To Post: > > To Leave: > > Archives: http://www.yahoogroups.com/group/motoroladsp > > More Groups: http://www.dsprelated.com/groups.php3 > > Yahoo! Groups Links > > --------------------------------- __________________________________ |