RE: [c6x] SDRAM failure
Most likely the version of the POST that is stored in the FLASH does not account for the EMIF settings of the SDRAM on the DSK ... but the confidence test you are running does have the correct settings. Regards,
-----Original Message-----
When my C6711 DSK boots up, LED 2 remains on. But when I do the conf test, everything seems to be working fine. Is there a logical explanation for this? Thanks in advance
_____________________________________
_____________________________________
To Join: Send an email to c...@yahoogroups.com To Post: Send an email to c...@yahoogroups.com To Leave: Send an email to c...@yahoogroups.com Archives: http://www.yahoogroups.com/group/c6x Other Groups: http://www.dsprelated.com
" TARGET="_blank">http://docs.yahoo.com/info/terms/ |