|
Hi Darren, I guess you have to run the hex6x (commandline) tool to convert your OUT (COFF format) to a BINARY file... Regards, Anton Quoting darrenpowierski <>: > > I am trying something similar. I can compile and run a program > under CCS correctly. Taking the same .out file and loading > via HPI does not work. I have included the HWI reset vector. > I perform a DSPINT via HPI. It seems it is something due > to using the .cmd file generated by DSP/BIOS cdb file. > I can load .out file and run a simple program correctly after > using a .cmd that I generate and using no DSP/BIOS. > > If you can help this would be great. > > Thanks > > Darren > > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author > of this message will receive your answer. You need to do a "reply all" > if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c6x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > |