--On Thursday, January 29, 2004 12:55 PM +0100 Mohamed Akresh <> wrote: > I am trying to connect two ADSP-21065L EZ-Lab. Be careful with this: The bus speed is very high and a simple ribbon cable won't do it, as the edge rates result in lots of cross-talk in the data signals. There's some special ribbon cable made for this kind of thing, with adjacent conductors "shaped" to not be parallel. As I didn't have any when I did this, my hardware buddy used an Exacto knife and coffee stirrers to fake some up from regular ribbon cable. Looked silly but worked pretty well. |