John, The LCD is controlled by the 68HC11 microcontroller on the EVM. There's no way to control it directly via the DSP. -- dB --- arnold_the_cat2002 <> wrote: > > > Hi, I am a newbie to DSP and I have recently acquired a 56362EVM. It > has an LCD built into it which I need to use to display settings for > a filter sweep effect I am trying to create. I think the LCD is > memory mapped to port C but I have no idea how to initialize the LCD > for writing or the exact address to send data to. If anyone could > give me some pointers or some example assembler code I would greatly > appreciate it. Thanks very much. > > John > > __________________________________ |