Hello, I am having trouble getting CCS to initialize a target upon startup. I am getting the error shown below. The processor is a TMS320VC5416. I am running CCS 2.20.00.I am using a Spectrum Digital XDS510-USB emulator. I have successfully detected the JTAG device in the scan chain by doing an emulator test in SDConfig. Probing the board reveals that the processor is receiving power. Searching for PTI_ERR_CNTL_REVISION came up with no hits, but it sounds like CCS has a problem with the processor version. Thanks.

Can't Initialize Target CPU: Error 0x00000200/-1081

Error during: OCS, PTI_ERR_CNTL_REVISION

Error Occured at 0x00000000 I/O

Port = 510 Board Name: SDGO54USB (Spectrum Digital)

Cpu Name: CPU_1

Roberta Alessi

OMAP35x EVM jump-starts low-power apps
The modular and extensible OMAP35x Evaluation Module (EVM) enables developers to start building applications based on the OMAP35x architecture: http://www.DSPRelated.com/omap35x Start a New Thread