Martin, I understand your problem. I had some trouble using that visual linker too, so I reverted to using the standard linker. I do recall, however, that I was able (after a lot of grief) to get a project to build using the visual linker. I am leaving for a ski trip this weekend, but when I get back, I will open that project and see what I did. Perhaps by then someone else in the group will answer your question. Keep me informed. Tony ----- Original Message ----- From: Martin Collins <> To: <> Sent: Thursday, March 15, 2001 1:45 AM Subject: Re: [c54x] Bug in Code Composer Studio > Hi Tony, > > thanks for your reply. My problem is exactly that I'm using the new linker. > When I changed my project over to the new linker and created the recipe > file, the > View for setting linker options disappeared! So it's not possible to supply > a path > to the bios.a54 library. It needs to be included in the list of libraries in > the Project View. > But Code Composer will not allow me to do that. It insists on putting it > into the > list of source files. And when the assembler comes along and tries to do > something with > it, it -the assembler -gets itself into knots and I have to kill it with the > Task Manager. > I think this definitely has to be a bug. > > By the way do you know what the bios.a54f is for? > > Cheers, > > Martin. > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > |