Anyone out there know of a simple example showing the setup ad use of the USB peripheral on the 5509, preferably in a DSP/BIOS based application? I have a Spectrum Digital 5509 EVM, but the Sample project uses a precompiled lib to demo the USB as a general storage device class driver. But it doesn't really work, nor is it a terribly useful example because there is no source for it. Really now, there has to be some reasonable example out there somewhere, if no one knows of any, I'll muddle thru and work up an example myself that can be tossed out for folks to throw rocks at. Regards, John Volkar ---- Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. |