The following is from a reply I received from ADI support about a similar
problem that occurred when I turned "eliminate" on in the ldf
global properties :
Hi Steve,
You need to use the keep command as follows:
KEEP( _main,___ctor_NULL_marker,___lib_end_of_heap_descriptions
)
According to our tools group, this is the only object that comes from
the
runtime environment that needs to be kept. I've put in a
documentation
errata
against this, because it should be mentioned in the eliminate()
command
description or in the c library manual.
Sorry for the confusion.
Analog Devices
DSP Support Group
This command should go just after the P0 section in your ldf file as
:
PROCESSOR p0
{
KEEP(
_main, ___ctor_NULL_marker, ___lib_end_of_heap_descriptions)
You should only nee this if your ldf contains :
ELIMINATE()
At 12:23 PM 4/4/2004, Uday Kumar Majeti wrote:
Hello everybody,
when i try to run the following program(files attached) i'm getting
the error as:
"C:\Program Files\Analog Devices\VisualDSP\cc21k.exe"
"C:\Program
Files\AnalogDevices\VisualDSP\21k\examples\C_Examples\uday\matvec\debug\MxNxNx1.doj"
-T "C:\Program Files\Analog
Devices\VisualDSP\21k\examples\C_Examples\uday\matvec\matvec.ldf"
-21061 -L "C:\Program Files\Analog
Devices\VisualDSP\21k\examples\C_Examples\uday\matvec\debug" -o
"C:\Program Files\Analog
Devices\VisualDSP\21k\examples\C_Examples\uday\matvec\debug\matvec.dxe"
[Error E2007] symbol '_main' referenced in file 'C:\PROGRAM
FILES\ANALOG DEVICES\VISUALDSP\21K\LIB\060_HDR.DOJ' could not be
resolved Linker finished with 1 error(s) 0 warning(s)
CC21K: Fatal Error: Link failed Tool failed with exit/exception
code: 1.
Build was unsuccessful.
Win
an evening with the Indian cricket captain:
Yahoo!
India Promos.
_____________________________________
Note: If you do a simple "reply" with your email client, only
the author of this message will receive your answer. You need to do
a "reply all" if you want your answer to be distributed to the
entire group.
_____________________________________
About this discussion group:
To Join: Send an email to a...@yahoogroups.com
To Post: Send an email to a...@yahoogroups.com
To Leave: Send an email to a...@yahoogroups.com
Archives:
http://groups.yahoo.com/group/adsp
Other Groups:
http://www.dsprelated.com/groups.php3
Yahoo! Groups Links
To
--------------------------
Steve Holle
Link Communications, Inc.
1035 Cerise Road
Billings, Montana 59101-7378
406.245.5002
s...@link-comm.com
--------------------------
|