Hi,
Try using the commands
'pack' and 'save' to free memory by saving the
workspace variables to hard disk. Also use 'clear' to free workspace
of those variables whose life is over.
-Snehamoy
|
Hi,
Try using the commands
'pack' and 'save' to free memory by saving the
workspace variables to hard disk. Also use 'clear' to free workspace
of those variables whose life is over.
-Snehamoy
|
Hi
I had similar problem when I was using NN toolbox and I had to change some parameter and get it fixed. So I suggest you play with some of the parameters that you have and see how it would behave.
Hadi
From:
Tony Do
[mailto:t...@yahoo.com]
Hi
: |
First see if there is any problem with the ram. (memtest86 is
available for free). I had the same problem when I upgraded my ram (the
store person gave me PC2700 while my existing ram was pc3200; clock speed
mismatch and caused out of memory errors with matlab: everything is fine after I
replaced pc2700 with pc3200).
Madhu.
Tony Do <t...@yahoo.com> wrote: Hi :
|
Hi : I am work on QAMand OFDM modulation project, and during the simulation I get the out of memory error after the message length large than 11, so I follow the help menu's instruction to expanded the memory into 4GB, but I still get the same error, so I need someone help me on this please. Tony ----------------------------- ۪IIEmailBBI KOUahoo!_|C http://tw.companion.yahoo.com/ |
|