Hi, I talked to our support and they told me that you just have to get a new CCS and make some changes inside of CCS. This fixed will be included on the 7.2 release of the tools. We tested one of these cards inside of a laptop and were able to connect to the target with this card. The support person just had to configure CCS to see the address and not the parallel port. Ron -- Metrowerks Community Forum is a free online resource for developers to discuss CodeWarrior topics with other users and Metrowerks' staff -- http://www.metrowerks.com/community -- Ron Liechty - MWRon@MWRo... - http://www.metrowerks.com -----Original Message----- From: motoroladsp@moto... [mailto:motoroladsp@moto...] On Behalf Of help56800 Sent: Wednesday, May 04, 2005 11:39 AM To: motoroladsp@moto... Subject: [motoroladsp] Re: Problem with J-TAG interface I could be wrong, but due to some implementation issues, CodeWarrior will not work with add-on parallel port adapters, such us PCMCIA-PP or USB-PP. Your best option is to use about to be released USB TAP, which is USB to JTAG adapter. You can purchase this HW right now from Metrowerks, and software drivers will be available in CodeWarrior 7.2 update, shceduled for release on May 16th. This update will be offered for free to current users of CodeWarrior 7.0 or 7.1. Also, Metrowerks is running a special for this USB TAP for $99 (original price is $250). You will need to use USBTAP56800E coupon during shopping cart checkout: http://www.metrowerks.com/MW/Develop/Embedded/USBTAP/default.htm --- In motoroladsp@moto..., orcim <orcim@i...> wrote: > I need to debug my application with a notebook that don't have a > parallel interface; for this reason I get a PCMCIA card that allow the > link between PC and J-TAG interface. > The drivers is "OX12PCI840 PCI Paralll Port" and it is correctly > installed because with others application it run. > > The problem is that the metrowerks debugger don't run.

I could be wrong, but due to some implementation issues, CodeWarrior will not work with add-on parallel port adapters, such us PCMCIA-PP or USB-PP. Your best option is to use about to be released USB TAP, which is USB to JTAG adapter. You can purchase this HW right now from Metrowerks, and software drivers will be available in CodeWarrior 7.2 update, shceduled for release on May 16th. This update will be offered for free to current users of CodeWarrior 7.0 or 7.1. Also, Metrowerks is running a special for this USB TAP for $99 (original price is $250). You will need to use USBTAP56800E coupon during shopping cart checkout: http://www.metrowerks.com/MW/Develop/Embedded/USBTAP/default.htm --- In motoroladsp@moto..., orcim <orcim@i...> wrote: > I need to debug my application with a notebook that don't have a > parallel interface; for this reason I get a PCMCIA card that allow the > link between PC and J-TAG interface. > The drivers is "OX12PCI840 PCI Paralll Port" and it is correctly > installed because with others application it run. > > The problem is that the metrowerks debugger don't run.

I need to debug my application with a notebook that don't have a parallel interface; for this reason I get a PCMCIA card that allow the link between PC and J-TAG interface. The drivers is "OX12PCI840 PCI Paralll Port" and it is correctly installed because with others application it run. The problem is that the metrowerks debugger don't run.