Hi! The examples for doing that was installed when you installed the code composer. You could also use the DSP/BIOS to configure and control your codec. It is much easier and more optimized. --emer On Thu, 22 Mar 2001 wrote: > I'm performing speech recognition with the 5402 DSK equipped with > AD50 codecs. I need to know how to continuously sample from the > microphone port on the DSK. Could someone please provide sample code > or help me out with the C functions necessary to perform this > continuous sampling using Code Composer? I've seen the General Help > files regarding C functions with the AD50, but I'm not sure what has > to be done, or how, regarding codec power up, initiation, sample > retrieval, etc. I'm in the dark! > > Thanks to all. > Dave Terry > Rochester Institute of Technology > > _____________________________________ > Note: If you do a simple "reply" with your email client, only the author of this message will receive your answer. You need to do a "reply all" if you want your answer to be distributed to the entire group. > > _____________________________________ > About this discussion group: > > To Join: Send an email to > > To Post: Send an email to > > To Leave: Send an email to > > Archives: http://www.yahoogroups.com/group/c54x > > Other Groups: http://www.dsprelated.com > ">http://docs.yahoo.com/info/terms/ > |