Reply by help56800 October 12, 20052005-10-12
Start by looking at the following short multimedia files. Each one is
about 2-3 minutes long and are the best way to get up the speed on
CodeWarrior and Processor Expert:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?
code=DSP56F801&nodeId27956292#Training_Reference_Material --- In motoroladsp@moto..., "pitchayav" <pitchayav@F...> wrote:
>
> Hello, I am new on CPU programming also DSP. I have a job to make
the
> test board that has DSP56F801 to control the board.
> May I ask for how to get start with this? Also, which any basics
that I have
> to know about using the CodeWarrior IDE version 5.6.1.1658 compiler.
> Then, if I study to use "processor expert" on CodeWarrior which
spent a lot
> of time to study it, is it worth to use this PE? or it is easier to
write only
> source codes and compile them?
>




Reply by pitchayav October 12, 20052005-10-12
Hello, I am new on CPU programming also DSP. I have a job to make the
test board that has DSP56F801 to control the board.
May I ask for how to get start with this? Also, which any basics that I have
to know about using the CodeWarrior IDE version 5.6.1.1658 compiler.
Then, if I study to use "processor expert" on CodeWarrior which spent a lot
of time to study it, is it worth to use this PE? or it is easier to write only
source codes and compile them?