I believe the seed-XDSUSB2.0 emulator works with TI CCS2.x supported
devices.
1. Have you used the emulator with any other boards??
2. I believe that this emulator uses standard TI emulation drivers.
Make sure that you select the c64x driver that matches your silicon [the two
drivers support c64x v1.0x and 'v1.1 and newer'.
3. Run the TI xdsprobe utility to verify scan chain connections. In
/ti/cc/bin dir from a DOS prompt [replace "<xx>" with actual values:
xdsprobe -i -p <seed-emulator-address> -f
<path_and_name_of_seed_cfg_file>
mikedunn
spade7cn <s...@yahoo.com.cn>
wrote:
recently I happened to made a C 6416 PCB board
myself.and I bought seed-XDSUSB2.0 emulator to connect to my PCB board to
start emulations.but unfortunatelty ,when I start CCS,the emulator cannot
connect to the CPU on the board after I had installed all the software and drivers necessarily needed.It shows the error NO.<- 1153>,tell me that the address 0x00000000 kept indicating "Not Ready",and advice me to reset the CPU.and I reset the CPU several times
before starting CCS,it doesn't work either. Now I am disconsolate
about it so much.I wanted to know is there anyone who ever emulated C6416?
and is there anyone who can tell me under what exactly conditions that can
make the emulator connecting to the board succesfully.(like how the JTAG
interface be connected and are there any pin of the 6416 should be
configed before start
CCS?) thanks alot!!
_____________________________________ Note: If you do a simple "reply"
with your email client, only the author of this message will receive your
answer. You need to do a "reply all" if you want your answer to be distributed
to the entire group.
_____________________________________ About
this discussion group:
To Join: Send an email to
c...@yahoogroups.com
To Post: Send an email to
c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
Yahoo! Groups Links
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to: c...@yahoogroups.com
<*>
|