Reply by Carlo Concari April 20, 20062006-04-20
Hello group,

I'm having a weird problem with a 56F8013 evaluation board.

The problem is that on some computers, the debugger won't work; the code can
be run but execution won't stop neither on breakpoints nor by pressing the
"Stop" button.
Furthermore, it won't stop on application launch, even if this option is set
in the Debugger Settings.

We have tested on half a dozen different PCs. All tested PC's have CW 7.2 for
56F800. About half the PCs work with no problem with both parallel port and
USB JTAG converters; the other half won't work with either one, even after
uninstalling and re-installing CW.

Any help is greatly appreciated!

Regards,
Carlo.