Hello,
the real code size is increased in ~100 words only (see the project's .xMAP
file). There is a data size calculated twice in the size, the debugger shows
while downloading to a chip (this is because the linker doesn't know about
program and data RAM overlapping and because the both program and data RAMs are
used). The real size of the Wait in RAM routine is about 11 words. These 11
words are reserved for the routine in RAM. The rest of RAM could be used for
data. So, there should not be a problem with memory consumption.
Petr
Hello group,
>I want to use unused part of FLASH as area to store
>some parameters. Using corresponding bean it works,
>but only when "waiting in RAM" is enabled. Code
>increases in ~4KB, which becomes trouble for this
>small DSP. Could you help with some example that
>consumes less space than the bean uses - to set
>protection Off, write data with pooling for the end of
>operation, protection On and reading of data
>
> Gentcho