hi,
have you included the CodeStartBranch.asm in your proyect?. I had a similar
problem but it was just that i forgot to include it.
i hope it helps
Ana
I have pull-up for GPIOF4. After powering up, the
>program goes nowhere, and the board don't respond
as
>expected. Then I connect to the board through JTAG
>link, and reset the cpu, then just run the cpu(don't
>load any program because the program have been
>programmed into flash), everything is ok. It seems the
>flash boot mode is selected correctly. But without
>jtag, it does't work. why?
>
>Chao
>
Check Out Industry's First Single-Chip, Multi-Format, Real-Time HD Video
Transcoding Solution for Commercial & Consumer End Equipment: www.ti.com/dm6467