>Hello bhooshaniyer, 
>
>I've solved the problem, it was the .gel file for a reason I don't
>understand (because it has been working before with the same file). 
>
>Regards
>

Thats good.Iam glad that you cud through the problem but beware of the
magic wand.Problems dont dissapear out of good will.

My sincere advice to you is: Understand how to program an embedded system
and how does the tool chain work.You could possibly take the help of the
Embedded Systems Book by David.E.Simon.

--Bhooshan


		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

Hello bhooshaniyer, 

I've solved the problem, it was the .gel file for a reason I don't
understand (because it has been working before with the same file). 

Regards

>I've changed nothing, 

You have changed nothing from what?

>my code is the same as before

Define *before*

what code?

who wrote it?

for which platform?

>and it has been
>working fine until now. 

Who checked it?

>Can someone help me ?

I would like to help you but am not sure if you will understand what I
would say.You need to probably read one tutorial or manual completely.

--Bhooshan
		
This message was sent using the Comp.DSP web interface on
www.DSPRelated.com

I have the same error message with the tutorials included with 
Code Composer Studio.
Maybe it's an hardware issue ?

HELP PLEASE

When trying to load the program (in Microprocessor mode) I got the
following message "Load Failed. A section of your program fails into
a memory region that is not writable. Check your linker configuration
and/or memory map." 
I've changed nothing, my code is the same as before and it has been
working fine until now. 
Can someone help me ?

Hardware : eZdsp LF2407A 
Software : C2xx code composer studio 

Sorry for my english 
Thanks