Hello Francisco,
You may have a mismatch between your actual image size and the space that
you are reserving for it.
Do you have a special section called '.image' in your linker
command file?? Check the size of it vs. the size needed by your program -
you will likely find that it is too small.
mikedunn
fsc10174 <f...@netcabo.pt>
wrote:
Hi all,
Can anyone tell me how can I solve
this:
TMS320C6x COFF Linker Version 4.00 Copyright (c) 1996-2000
Texas Instruments Incorporated >> cannot allocate .image in SDRAM
(page 0) >> errors in input - img_proc.out not built Build
Complete, 2 Errors, 7 Warnings.
Thanks in advance, BR Francisco Cohen
_____________________________________ Note: If
you do a simple "reply" with your email client, only the author of this message
will receive your answer. You need to do a "reply all" if you want your answer
to be distributed to the entire group.
_____________________________________ About this discussion group:
To Join: Send an email to c...@yahoogroups.com
To Post: Send
an email to c...@yahoogroups.com
To Leave: Send an email to
c...@yahoogroups.com
Archives:
http://www.yahoogroups.com/group/c6x
Other Groups:
http://www.dsprelated.com
Yahoo! Groups Links
<*> To
visit your group on the web, go to: http://groups.yahoo.com/group/c6x/
<*> To unsubscribe from this group, send an email to: c...@yahoogroups.com
<*>
|