carl@mak2.co-dot-uk.no-spam.invalid (carlvonclauswitz) wrote in
news:3tmdnScRnN2jbj3fRVn_vg@giganews.com:
> Hi all,
>
> I have designed a 4th order bandpass filter using MatLab FDA tool.
> The filter contains 2 2nd order stages which is fine and I can view
> them in Simulink. The filter is a chebyshev type 1 with fp1=300Hz
> fp2=3kHz.
>
> I have the coefficients and scaling factors but have no idea how to
> code a cascaded (2 sos) filter in ADSP2181 assy language.
>
> If anybody could point me in the direction of a good tutorial or help
> me with the ADSP assembly language, I would be very greatful. I have
> tried the documentation and language guide but it doesn't really
> help.
>
> I think what i need is a good tutorial which explains how to get from
> a simple IIR difference equation to the assembly language on ADSP
> 2181.
>
> Sorry if this seems an overly basic question, but I am having no luck
> with the documentation and have achieved nothing in the past two days
> of trying.
>
> Thanks in advance,
> Carl
>
>:oops:
>
>
Have you read the chapter in the ADI book, Digital Signal Processing
Applications for the ADSP-2100 Family.
There is a link on our developers page:
http://www.danvillesignal.com/index.php?id=dspdev
--
Al Clark
Danville Signal Processing, Inc.
--------------------------------------------------------------------
Purveyors of Fine DSP Hardware and other Cool Stuff
Available at http://www.danvillesignal.com
Reply by carlvonclauswitz●June 3, 20052005-06-03
Hi all,
I have designed a 4th order bandpass filter using MatLab FDA tool.
The filter contains 2 2nd order stages which is fine and I can view
them in Simulink. The filter is a chebyshev type 1 with fp1=300Hz
fp2=3kHz.
I have the coefficients and scaling factors but have no idea how to
code a cascaded (2 sos) filter in ADSP2181 assy language.
If anybody could point me in the direction of a good tutorial or help
me with the ADSP assembly language, I would be very greatful. I have
tried the documentation and language guide but it doesn't really
help.
I think what i need is a good tutorial which explains how to get from
a simple IIR difference equation to the assembly language on ADSP
2181.
Sorry if this seems an overly basic question, but I am having no luck
with the documentation and have achieved nothing in the past two days
of trying.
Thanks in advance,
Carl
:oops: